Binders are chemical additives designed to improve the internal cohesion of ceramic bodies.

Available in liquid or powder formulations.

  • Main Function: To create chemical bonds between clay particles and inert raw materials, such as sand and feldspars.
  • Nature: Temporary, as they act before firing.

Why Use Them? Production Benefits

Adding a binder is not just a technical improvement, but a strategic choice to enhance production efficiency:

  • Increased Mechanical Strength: Improves the modulus of rupture (MOR) of the dried material.
  • Reduced Waste: Stronger tiles better withstand mechanical stress along transport and glazing lines, reducing breakage and chipping.
  • Cost Optimization: Allows manufacturers to reduce the proportion of premium plastic clays, which are more expensive, while maintaining the required mechanical properties.
  • Large-Format Tiles and Slabs: Essential for producing slabs and large-format tiles, where flexibility and breaking strength are critical.

How They Work

  • At the Chemical Level: The functional groups of the binder molecules bond with mineral particles, improving the stability of the suspension (slip).
  • During Pressing: They promote better compaction of atomized powders, providing greater flexibility to the unfired tile.

Methods of Addition

  • During grinding in the mill
  • Directly into the tank
  • Injected into the production stream before the spray dryer (in-line injection)
cross